| 参数名称 (Name / Название / Nombre) | 单位 (Unit) | 参数值 (Value) |
| 供电电源 / Power Supply | VDC | 7 – 28 |
| Источник питания / Fuente de alimentación | ||
| 功耗 / Power Consumption | W | < 2 |
| Энергопотребление / Consumo de energía | ||
| 工作电流 / Operating Current | mA | 视传感器而定；驱动能力 500 |
| Рабочий ток / Corriente de funcionamiento | (Depends on sensors; drive capacity 500) | |
| 工作温度 / Operating Temperature | °C | -40 ~ 85 |
| Рабочая температура / Temperatura de trabajo | ||
| 湿度 / Humidity | % RH | 0 – 95 (无冷凝 / non-condensing) |
| Влажность / Humedad | ||
| 防护等级 / Protection Level | — | IP65 |
| Степень защиты / Grado de protección | ||
| 支持传感器 / Supported Sensors | — | 惠斯通电桥应变式称重传感器 |
| Типы датчиков / Sensores compatibles | (Wheatstone bridge strain load cells) | |
| 激励电压 / Excitation Voltage | VDC | 5 ± 3% |
| Напряжение возбуждения / Voltaje de excitación | ||
| 通道数 / Channels | — | 6 – 8 |
| Количество каналов / Canales | ||
| 输入信号范围 / Input Signal Range | mV | 0 – ±30 |
| Входной диапазон / Rango de señal de entrada | ||
| 分辨率 / Resolution | — | 1/500,000 |
| Разрешение / Resolución | ||
| 采样率 / Sampling Rates | Hz | 10, 40, 640, 1280 |
| Частота дискретизации / Tasa de muestreo | ||
| 通讯接口 / Communication Interface | — | RS485, Modbus RTU |
| Интерфейс связи / Interfaz de comunicación | ||
| 波特率 / Baud Rates | bps | 2400 – 600,000 |
| Скорость передачи / Velocidad de baudios | ||
| 通讯地址 / Addresses | — | DIP: 0–15, 软件: 1–255, 广播: 254 |
| Адреса / Direcciones | ||
| 重量 / Weight | g | ≈ 250 |
| Вес / Peso |
卖点1：多通道高精度采集
·
中文：8路称重/测力输入，兼容各类惠斯登电桥式称重传感器，输入信号范围0~±30mV，内置Σ Δ A/D与微处理器，稳定分辨率可达1/500000，采样频率支持10/40/640/1280Hz，可兼顾高精度静态称重和高速动态测力。
·
·
EN: 8 high precision weighing/force channels compatible with Wheatstone bridge load cells. Input range 0~±30 mV, sigma delta ADC plus MCU design delivers up to 1/500,000 stable resolution with selectable 10/40/640/1280 Hz sampling – ideal for both static weighing and fast dynamic force measurement.
·
卖点2：灵活强大的校准功能
·
中文：支持单点标定、多点分段标定（最多10点）、无砝码数字标定三种方式，可设置分度值、自动零点跟踪、爬坡补偿、动态跟踪、滤波深度等参数，轻松应对长期漂移和现场震动，提高称重稳定性。
·
·
EN: Flexible calibration options – single point calibration, up to 10 point piecewise calibration and full digital calibration without test weights. Division value, auto zero range, creep tracking, dynamic tracking and filtering depth are all adjustable to minimize drift and vibration effects and keep readings stable over time.
·
卖点3：RS485 & Modbus，易于集成
·
中文：采用RS485总线、标准Modbus RTU协议，支持功能码03/06/16，波特率2400~600000bps可通过DIP开关或寄存器配置，从站地址1~255并带广播地址254，方便接入PLC、DCS、上位机或触摸屏，实现集中采集与远程监控。
·
·
EN: Uses RS485 bus with standard Modbus RTU protocol (codes 03/06/16). Baud rate is configurable from 2400 to 600000 bps via DIP switches or registers, and slave address range is 1–255 plus broadcast 254, making it easy to integrate with PLCs, DCS systems, HMIs or PCs for centralized data acquisition and remote control.
·
卖点4：工业级结构与环境适应性
·
中文：宽电压直流供电（约7~28VDC），5V±3%传感器激励，每路可驱动最多4只350Ω传感器；工作温度 40~85℃、湿度0~95%RH（无冷凝），防护等级IP65，并提供面板螺丝安装和导轨安装两种方式，适合恶劣工业现场长期运行。
·
·
EN: Wide range DC supply (approx. 7–28 VDC), 5 V ±3% sensor excitation with up to four 350 Ω load cells per channel. Operating temperature –40 to 85 °C, humidity 0–95% RH (non condensing), IP65 protection and both panel mount and DIN rail options ensure reliable operation in harsh industrial environments.
·
卖点5：紧凑尺寸，多场景应用，标配说明
·
中文：模块外形约175×90×40mm，带可插拔端子，布线紧凑；适用于料斗秤、料仓秤、平台秤、拉压力检测、张力控制、配料系统等多种场合。标配：八路数字称重变送器主机×1，插拔式接线端子若干（以实物为准）；本产品不含称重传感器和电源。
·
·
EN: Compact housing around 175 × 90 × 40 mm with pluggable terminals for easy wiring. Widely used in hopper scales, tank scales, platform scales, tension/compression testing, tension control and batching systems. Standard package: 1 × 8 channel digital weighing transmitter and pluggable terminal blocks (subject to the actual product); load cells and power supply are not included.
